1/12 Mini-Trophy with DT-1 Body 4WD RTR

This is the radio controlled, electric powered ready-to-run, 1/12 scale
Mini-Trophy Desert Truck from HPI.

FEATURES: Chassis: Nylon tub with inner roll cage
Drive: Four wheel shaft
Radio: HPI TF-1 27MHz 2-channel pistol grip with SF-1 steering servo
Motor: HPI Firebolt 540 size, 15 turn
Electronic Speed Control: HPI SC-15 with reverse (HPIM0341)
Differential: Metal planetary gears
Spur Gear: Composite construction 87 tooth, 48 pitch
Pinion Gear: Steel construction 18 tooth, 48 pitch
Ball Bearings: Full set
Shocks: Composite body, oil-filled
Body: Three-piece DT-1 painted and trimmed with race team graphics,
realistic interior with two driver figures and two non-functional
spare tires in bed of truck
Suspension: 4-wheel independent with aluminum front and rear uprights
Tires: Licensed Yokohama Geolander 1.3" (34mm) wide, 3.7" (94mm)
diameter with foam inserts
Wheels: Matte chrome finish 1" (26mm) wide, 2.2" (54mm) diameter
12mm hex
Bumpers: Front and rear skid plate type
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Non-adjustable, camber refers to the angle of the tops of
the tires from vertical when viewed from front or behind vehicle
Warranty: Two year limited through HPI beginning at date of purchase.
Warranty valid only in the USA, Canada and South America.

INCLUDES: RTR Mini-Trophy Desert Truck, 27MHz radio, steering servo, motor, ESC
body and instruction manual

REQUIRES: Battery: 6-cell NiMH stick pack with Standard connector
Battery Charger: NiMH compatible, peak type
AA Batteries: Eight for transmitter

SPECS: Vehicle;
Length: 21" (533.4mm)
Width: 9" (233mm)
Wheelbase: 12.3" (312mm)
Height: 6.4" (162mm)
Body;
Length: 18.5" (470mm)
Width: 6.8" (174mm) behind front wheels, narrowest point
8.3" (210mm) at front fenders, widest point
Height: 4.8" (123mm)

COMMENTS: For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 10x15mm Fr Uprights 1 DTXC1595
2 5x11mm Fr Uprights 1 DTXC1547
2 5x11mm Fr Diff 1 DTXC1547
2 5x11mm Rear Diff 1 DTXC1547
1 5x11mm Spur Gear Assembly 1 DTXC1547
1 10x15mm Spur Gear Assembly 1 DTXC1595
2 10x15mm Rear Uprights 1 DTXC1595
2 5x11mm Rear Uprights 1 DTXC1547


jxs 07/07/10
ir/jxs

Realistic looking three piece body with 1:1 replica race team graphics with windows to show driver figure set
Shaft drive 4WD for high grip on any surface and the durability of shaft drive
Tough metal gears for strength and durability
Tough Steel Dogbones on all four corners
High strength aluminum front and rear uprights
Aluminum Hubs for greater strength and durability
Officially Licensed Yokohama Geolandar Tires
Wheel Independent Suspension Soaks up the ruts and bumps of desert terrain
Oil filled shocks for smooth suspension dampening
Easily adjustable threaded shocks for quick ride height changes
Two lightweight faux-spare wheels/tires are mounted in the truck bed for realistic desert truck looks
Realistic Interior with Two Driver figure set featuring an interior that includes a driver and navigator for the ultimate in realism
The included slipper clutch protects the drivetrain and can be adjusted to suit track conditions
A complete set of ball bearings is included for drivetrain efficiency and low maintenance
Front and rear skid plate bumpers for realistic looks and crash protection
Adjustable body mounts to help fine tune the body height and width
High strength nylon tub chassis for durability
Complete interior roll cage for scale looks and crash protection
1.9" wheels with 12mm hex hubs allow you to use a wide variety of aftermarket wheels
Industry standard for compatibility with a wide variety of optional wheels
Realistic looking desert truck suspension arms for high grip and scale looks